Condensate station ARI-CONLIFT 691

Condensate station ARI-CONLIFT 691

Condensate stations manufactured by Teploterm based on ARI-ARMATUREN condensate pumps (Germany) are one, two or three ARI-CONLIFT condensate pumps with a common receiver, connecting pipes and all necessary equipment, compactly mounted on a common metal frame. The stations are completely ready for connection and commissioning.

The use of a condensate station allows you to save on the cost of installation and commissioning, reduce the time spent on preparing for the start-up of condensate pumps.

In the event that the performance of one pump is not enough, the use of one common frame and receiver reduces the cost of piping all pumps separately. For this purpose, stations are offered that simultaneously use two or three pumps connected in parallel on the same frame. On request, a station can be supplied with compressed air as the control medium.

Main technical data:

1. Nominal diameters of pumps (inlet/outlet): DN50x50, DN80x50 (ductile iron body); DN25x25, DN40x40, DN50x50, DN80x50 (carbon steel and stainless steel body)
2. Nominal pressure: 16 bar
   
3. Permissible differential pressure: 10 or 14 bar (ductile iron); 10 bar (carbon steel / stainless steel)
   
4. Medium temperature: from -10 ˚С to +200 ˚С
5. Productivity: from 0.5 m ³ / hour to 15 m ³ / hour
   
6. Body material: malleable iron (standard); carbon / stainless steel
7. Number of pumps: 1, 2 or 3 pcs.