Condensate pump (mechanical) ARI-CONLIFT 22.691

Condensate pump (mechanical) ARI-CONLIFT 22.691 DN50/50 - DN80/50

The ARI-CONLIFT condensate pump is used to pump condensate in systems where there is a negative pressure difference between the condensate pressure and the back pressure in the condensate line.
The own pressure of the condensate is not enough to flow to the collection point, therefore the condensate must be forcibly pumped out. The condensate pump is a device with a driving medium such as steam, compressed air. The principle of operation of the condensate pump is based on the displacement of condensate by the driving medium.

Main technical data:

1. Nominal diameters (inlet/outlet): 50/50, 80/50
2. Media pressure: 10 or 14 bar
3. Medium temperature: from -10 ˚С to +200 ˚С
4. Weight (complete): 98, 103 kg
5. Weight (pump only): 89.90 kg
6. Body Material: Ductile Iron EN-GJS-400
7. Mounting position: horizontal

Peculiarities:

• Autonomous operation based on the principle of a mechanical displacement receiver, with automatic adjustment to the level of incoming condensate
• Rugged, durable performance
• All internal parts in stainless steel, wear parts in hardened stainless steel
• Long-lasting springs made of high-temperature wear-resistant alloy Inconel X-750
• Housing designed for a high number of operating cycles
• Does not require additional settings
• Low backwater height
• Works without the use of electricity
• No leakage due to the absence of moving parts protruding from the body

Options:

• L-profile rack (for mounting on frames, etc.)
• Electronic stroke counter
• Insulation
• Internal pressure gauge
• Welded threaded connection for supply of working steam and air outlet.
• Ball valve for drainage