Drainage pump Grundfos Unilift KP150-A-1 (with 10 m cable)

Drainage pump Grundfos Unilift KP 150-A-1 (with 10 m cable)

Description

The KP-150-A1 is a small size single stage submersible pump with float switch, vertical discharge and screen base.
All parts in contact with the medium are made of chromium-nickel stainless steel. Fluid lubricated plain bearings require no maintenance. The rotor area is filled with environmentally friendly liquid.

Distinctive features

• float switch
• high wear resistance
• compactness
• easily replaceable cable
• convenient service
• long service life

Advantages

The pump is equipped with a float switch that automatically turns on and off depending on the water level.
The drainage pump can be used both for permanent (stationary) operation and transferred from place to place due to its compact size, ease of installation and convenient operation.
The pump does not require special maintenance, it is enough just to clean it from the dirt accumulated inside. For this purpose, it is possible to remove part of the base casing.

Application

Drainage pump KP-150-A1 is used for pumping water from drainage wells, pits, pools, ponds, etc., as well as in small sewage treatment plants.

Pumped media

The pump pumps clean and polluted water without fibrous inclusions with solid particles up to 10 mm.

Operating restrictions

• the temperature of the pumped water is not higher than 50°С (70°С is allowed for a short time, but not more than 2 minutes)
• immersion depth - up to 10 m